Yokogawa MLX - Manual (Page 8)

Page 8 of 49
IM 60A02S01-01E-A
2. Handling Cautions
This chapter provides important information on how to handle the MLX Loop Powered Process
Indicator. Read this carefully before using the indicator.
The MLX indicator is thoroughly tested at the factory before shipment. When taking delivery of
an instrument, visually check it to make sure that no damage occurred during shipment.
Also check that the indicator mounting hardware shown in figure 2.1 is included. After checking
the indicator, carefully repack it in its box and keep it there until you are ready to install it.
Figure 2.1 MLX Mounting Hardware