Yokogawa EJA310E - Manual (Page 53)

<9. General Specifications>
9-5
IM 01C25B01-01E
 Physical Specifications
Wetted Parts Materials
Diaphragm, Cover Flange, Process
Connector, Capsule Gasket, and Vent/Drain
Plug
Refer to “Model and Suffix Code.”
Process Connector Gasket/o-ring
[EJ110, EJ120, EJ430, EJ310]
PTFE Teflon
Fluorinated rubber for Option code /N2 and /N3
[EJ130]
Fluorinated rubber (O-ring)
[EJ440]
Fluorinated rubber (O-ring) for C capsule
Glass reinforced Teflon (gasket) for D capsule
Non-wetted Parts Materials
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane paint or ASTM CF-8M stainless
steel
Degrees of Protection
IP66/IP67, NEMA TYPE 4X
Cover O-rings
Buna-N, fluoro-rubber (option)
Nameplate and tag
316SST (including /N4 wired tag)
Fill Fluid
Silicone, Fluorinated oil (option)
Weight
[Installation code 7, 8, and 9 and wetted parts
material code S for EJ110, EJ310, and
EJ430 (Except for measurement span code
F)]
2.8 kg (6.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ120]
3.7 kg (8.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ130]
6.8 kg (14.3 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ440]
4.9 kg (10.8 lb) without integral indicator,
mounting bracket, and process connector.
Add 1.5 kg(3.3lb) for amplifier housing code 2.
Connections
Refer to “Model and Suffix Code.”
Process Connection of Cover Flange (models
except for EJ440-D): IEC61518