En g l is h english – Pfister VTP-E51W User Manual

Page 4

ENGLISH

ENGLISH

10 TANK INSTALLATION

The tank comes pre-installed with fl ushing mechanism. (Some adjustments may be
necessary). Attach Large Hose Nut (10A) to Fill Valve Shank (10B) located on bottom
of Tank (10C). Insert Rubber Gasket (10D) into Water Inlet Hole (10E) on top of Bowl
Shelf (10F). Place Tank (10C) on top of Bowl Shelf (10F) and align Brass Bolts (10G)
and insert Hose (10H) through corresponding Shelf Holes (10J). From underneath bowl,
screw Locking Nut (10K) onto Brass Bolts (10G) and tighten. Do not over tighten!
Carefully place Tank Cover (10L) over Tank (10C) to rest on Bowl Shelf (10F) securely.

11 WATER SUPPLY CONNECTION

Connect Short Hose Nut (11A) onto Water Supply Valve (11B). Turn on Water Supply
Valve (11B) by turning Handle (11C) counterclockwise.

12 UNIT START UP

Turn on Main Water Supply Valve and check for leaks.

13 FLUSHING

Press Flush Button (13A) to activate fl ushing mechanism. Flushing Button (13A) comes
with Full Flush (13B) and Reduced Flush (13C). Check for leaks above and below the
toilet.

14 SECURING TOILET BOWL

Secure Toilet Bowl (14A) to the fl oor surface by placing a bead of sealant around Toilet
Bowl Base (14B). (Sealant not included). Please follow manufacturer’s instructions
when using sealant.

10A

10B

10D

10G

10J

10K

10E

10F

10H

10C

10L

11A

13A

13C

13B

14A

14B

11C

11B

OPEN