Pfister E533-MNFC - Manual (Page 4)

ENGLISH
ENGLISH
15
14
16
FAUCET FUNCTIONS
13
12
14 SECURING INLET LINES
Do not cross Pullout Hose Connection (14A) with Inlet Supply Tubes (14B) to avoid
binding, jamming and interference with the movement of the Pullout Hose (14A).
15 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink
16 SPOUT FUNCTION
The Spout (16A) can be rotated around the Faucet Body in any direction.
13 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Faucet Inlets (13B), approximately three inches apart.
Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply line goes
to hot inlet fitting indicated by red tag (13C). (Supply lines not included). Follow
manufacturer’s instructions when installing supply lines.
12 WEIGHT ATTACHMENT
Place the two halves of the Hose Weight (12A) on either side of the Pull-Out Hose (12B)
as shown. Align Hose Weight (12A) halves with Pull-Out Hose (12B) in between and
secure with screws as shown.
4
14A
14B
14B
16A
HOT COLD
13A
13A
13B
13C
13B
12A
12A
12B
12B