Pfister F-531-4TMS - Manual (Page 5)

ENGLISH
ENGLISH
16
FAUCET FUNCTIONS
17
18
19
15
15 SOAP DISPENSER HEAD INSTALLATION
Pour in liquid soap (not included) into the Shank Orifice (15A). Insert Pump Mechanism
(15B) into Soap Dispenser Body (15C). Install Dispenser Head (15D) by pushing firmly
onto Pump Mechanism (15B).
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
17 FAUCET FUNCTION
COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise. The Spout (17A) can be rotated around the Faucet Body in
any direction.
Note: Flush faucet before turning on valve (see step 21).
18 PULL-OUT OPERATION
The Spray Head (18A) can be pulled forward to spray water in any direction.
19 SPRAY OPERATION
To activate the spray mode, simply press Toggle Button (19A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of the
Toggle Button (19A/19B) while the faucet is in operation. The water flow will increase
by sliding Spray Selector Switch (19C) from side to side (in spray mode only).
Note: The faucet will always turn on in regular stream mode.
5
17A
HOT COLD
OPEN
OPEN
19A
19B
19C
18A
15A
15B
15C
15D