Watlow WATVIEW - Manual (Page 33)

■
3 3
■
Wa t V i e w
To open this tool, choose F4 Profile Editor from the Tools menu.
You will be presented with a new profile image. This provides a
working template to create one or more profiles to store in this
image. The profiles stored in the controller are not displayed in this
step. Here are some tips to get you started with the profile editor.
• To work with the profiles stored in the controller, select
Controller menu > Read Profile Image From Controller.
• If you want to add a step to a profile, select the step right
before it by clicking in the Profile Image window, then select
Edit menu > Add Step.
• If you want to add a new profile, select Edit menu > Add
Profile.
• To save a copy of the Profile Image in a file for future use,
select File menu > Save Profile Image.
• To place these profiles into the controller for use, select
Controller menu > Send Profile Image to Controller.
F4S and F4D Profile Control
Use the F4 Profile Control tool to start, hold, resume and termi-
nate profiles from WatView. You can have one or more F4 Profile
Control tools open at the same time. To open this tool, choose
Tools
menu > F4 Profile Control.
N o t e
Profile changes made directly through the controller are not detected automatical-
ly by WatView. Only changes made using the F4 Profile Editor or read up (loaded
from the controller) and saved using the F4 Profile Editor are visible to WatView
and the F4 Profile Control tool.
F4S and F4D Set Time and Date Tool
Use this feature to set the date and time in a Series F4 ramping
controller to the current time and date according to the computer.
This is important if you plan to use an auto-start step in a profile,
because that function uses the controller’s time and date, not the
computer’s.