Watlow MINICHEF 2000 Fast Start - Manual (Page 8)

Panel Knock-out Pattern for a Mounting Collar in a Vertical Position
Figure 8 — Pattern for vertical panel 16- or 18-gauge thick.
Figure 8 — Pattern for vertical panel 20- or 22-gauge thick.
.800 in. ref
#6-32 stud (4)
minimum recommended
length 0.50 in.
2.462 in.
3.000 in.
1.662 in.
1.530 in.
1.250 in.
0.875 in.
0.375 in.
0.750 in.
0.000 in.
ø0.53 in. (6)
ø0.135 in. (8)
C/L
1.000 in. 0.500 in. 0.000 in. 0.500 in. 1.000 in. 1.337 in. 1.338 in.
1.000 in. 1.000 in.
.875 in. ref
#6-32 stud (4)
minimum recommended
length 0.50 in.
2.535 in.
3.000 in.
1.660 in.
1.530 in.
1.250 in.
0.875 in.
0.375 in.
0.750 in.
0.000 in.
0.250 in.
ø0.53 in. (6)
ø0.135 in. (10)
C/L
1.000 in. 0.500 in. 0.000 in. 0.500 in. 1.000 in. 1.405 in. 1.405 in.
1.375 in. 1.375 in. 1.000 in. 1.000 in.