Watlow ANAWIN 3 - Manual (Page 19)

OLE Reference AnaWin3 Quickstart Guide
16 Watlow Anafaze Doc.# 22852-10
+ (8)
Returned by GetRecipeList if there are no recipes stored for
the specified GroupNum.
%/
(9)
+ (10)
+%3 (11)
%1 (12)
%! (13)
These are the possible return values for RecipeLoadStatus.
/
(14)
Returned by SetChannelDataValues if NumVals does not
equal the size of the values array.
"
'& (15)
Returned by SetChannelDataValues or LoadRecipe if down-
loading data has been disable by the local user.
, (16)
When AnaWin3 starts up, it reads up the data tables for all at-
tached controllers. This can take several minutes depending
on how many controllers are on the bus. AnaWin3 will re-
spond with AWStartingUp to all data queries and download
requests during the startup process. The client should wait un-
til the startup process is complete before sending or requesting
data.
Table 3.1 PPC Channel Parameters
Parameter Number Parameter Description
Heat Prop Band
Heat Integral
Heat Derivative
Heat Output Type
Control Mode
Setpoint
Process Variable
Heat Output Filter
Heat Output %
HP Limit