Proface APL3000B - Node Box PC - Manual (Page 79)

PS-3710A/PS-3711A Series Hardware Manual
3-12
3.2.6 PCMCIA Unit Installation
(1) Remove the PCMCIA slot cover’s screws (2).
(2) [Inserting a commercial-type PC Card]
Insert the commercial-type PC Card into the PCMCIA connector.
[Removing the PC Card]
Press the eject button twice to remove the PC Card from the PCMCIA connector.
Pressing the eject button once causes its tip to come out.
Pressing the eject button the second ejects the PC Card from the PCMCIA slot.
(3) Replace the PCMCIA slot cover removed in (1) and secure it in place using the two PCMCIA slot
screws. The necessary torque is 0.5N • m to 0.6N • m.
• The PCMCIA slot has 2 connectors. When the PS-A unit is placed as shown below, insert
your PC Card with its face up.
PCMCIA Slot Cover
Eject Button
PC Card (commercial)