SaltDogg LS5 Liquid Spray System - Manual (Page 3)

3
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
3010816
3010979 1496505
3010180
Fig. 3
Cab Controller Installation
Instructions
(Fig. 5)
1. Install cab controller (#WSE1) in cab for convenient
driver operation. Mounting bracket and fasteners
included.
2. Route 8' wire harness (#WSE24) under dash from
controller (#WSE1) to truck’s fuse panel.
3. Ground “black” wire from controller to truck frame
or truck’s battery (not dash).
4. Attach “green” wire in 8' wire harness (#WSE24) to
a fused and keyed 15 Amp hot wire circuit.
5. Connect main power “white” wire in 8' wire har-
ness (#WSE24) to fuse box that is “hot” full time or to
battery “positive”.
6. Route the 25' wire harness (#WSE25) from the
rear of the spreader to the cab. Plug connector on
controller (#WSE1) to the connector on pump harness
(#WSE25).
Fig. 5 WSE1 Cab Controller front view
Fig. 5 WSE1 Cab Controller back view
WSE25
25' Cable Connector
WSE24
8' Cable
Connector
Fig. 4
LS5 can be adapted for Buyers'
4 and 4.5 cubic yard spreaders.