beautypg.com

Cab controller installation instructions – SaltDogg LS6 Liquid Spray System for SHPE1500, 2000 Style Spreaders User Manual

Page 3

background image

3

TM

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • saltdogg.com

3014065

LS102

Fig. 3

Cab Controller Installation
Instructions
(

Fig. 5)

1. Install cab controller (#WSE1) in cab for conve-

nient driver operation. Mounting bracket and fas-
teners included.
2. Route 8' wire harness (#WSE24) under dash from

controller (#WSE1) to truck’s fuse panel.
3. Ground “black” wire from controller to truck

frame or truck’s battery (not dash).
4. Attach “green” wire in 8' wire harness

(#WSE24) to a fused and keyed 15 Amp hot wire
circuit.
5. Connect main power “white” wire in 8' wire

harness (#WSE24) to fuse box that is “hot” full
time or to battery “positive”.
6. Route the 25' wire harness (#WSE25) from the

rear of the spreader to the cab. Plug connector on
controller (#WSE1) to the connector on pump har-
ness (#WSE25).

Fig. 5 WSE1 Cab Controller, front view

Fig. 5 WSE1 Cab Controller, back view

WSE25

25' Cable Connector

WSE24

8' Cable

Connector

Fig. 4