Ramsey Winch HDG-350 (JERR-DAN) - Manual (Page 6)

4
HYDRAULIC SYSTEMS
Refer to performance charts, below, to properly match your hydraulic system
to the HDG-350 winch performance. The charts consist of:
1. Line pull (lbs.) first layer vs. working pressure (P.S.I.). STATIC refers to
lifting a suspended load from rest; DYNAMIC refers to maintaining the
motion of a moving load.
2. Line speed, first layer (F.P.M.) vs. gallons per minute (G.P.M.).
Performance based on a motor displacement of 3.6 cubic inches with 15 GPM
maximum flow rate.