Ramsey Winch H-800 (JERR-DAN) - Manual (Page 4)

Ramsey Winch Model H-800 Dow-Lok
®
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey
Winch, and safety procedures one needs to know before operating a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go
into every winch we make. If the need should arise, warranty procedure is outlined on the
back of your self-addressed postage-paid warranty card. Please read and fill out the enclosed
warranty card and send it to Ramsey Winch Company. If you have any problems with your
winch, please follow instructions for prompt service on all warranty claims. Refer to back
page for limited warranty.
Note: The rated line pulls shown are for the winch only. Consult wire rope manufacturer for
wire rope ratings.
SPECIFICATIONS: Conforms to SAE J706
Rated Line Pull 1st Layer lbs. 20,000
kg. 9,060
Gear Reduction: All Models 40:1
Shipping Weight: H-800 369 lbs. (167 kg.)
Layer of Cable 1 2 3 4 5**
Rated Line Pull lbs. 20,000 16,600 14,200 12,400 11,000
all Models kg. 9,060 7,510 6,430 5,610 4,980
* Cable Capacity ft. 35 75 125 180 240
M 10 22 38 54 72
Line Speed Refer to chart of line speed versus GPM on page 5
* These specifications are based on recommended cable of 5/8" (16 mm) 6 x 19
extra improved plow steel cable.
** Fifth layer does not conform to SAE J706
4