beautypg.com

Ramsey Winch RPH-15000T User Manual

Page 9

background image

OM-914020-0199-A

7

INSTRUCTIONS FOR OVERHAUL OF RAMSEY WINCH

MODEL RPH 15,000T

DISASSEMBLY

Take note of mounting configuration for proper mounting of parts during re-assembly.

Disconnect tube (item #29) from elbows on bottom of brake (item #22) and valve (item #30).
Remove motor (item #24) from brake (item #22) by unscrewing capscrews (item #17). Tap
motor lightly to disengage.

Remove brake assembly screws from brake (item #22) to access (2) mounting screws (item
#16) attaching brake to end bearing (item #6). Remove coupling (item #3) and gasket (item
#23) from end bearing. If coupling is being replaced, be sure pin (item #26) is removed from
old coupling and installed into new coupling. If necessary, remove valve (item #31) from
motor by removing capscrews (item #14). If valve is removed, make sure two square cross
section o-rings remain seated in their counter bores in valve.