Ramsey Winch RPH-15000T User Manual

Page 10

Text mode
Original mode

OM-914020-0199-A

Remove tie plates (item #9) from end bearings (items #5 & #6) by unscrewing capscrews
(item #13), as shown. Slide motor end bearing (item #6) from drum (item #1) and drum from
gear housing end bearing (item #5). Remove input shaft (item #8) and thrust washers (items
#32, #33 & #34 ) from end bearings. Inspect gear teeth of shaft (item #8) and key (item #7)
for signs of wear. If necessary replace shaft and/or key.