Ramsey Winch RPH-15000T - Manual (Page 14)

OM-914020-0199-A
12
Attach motor (item #24) to brake (item #22). Use (2) capscrews (item #17) with lockwashers (item #20) and torque
to 74 ft. lbs. each. Securely connect tube (item #29) to elbows (item #21) in bottom of valve (item #30) and in
bottom of brake (item #22).
Bleed pressure release section of brake by loosening bleeder fitting on brake and allowing air to escape while
slowly appling hydraulic system pressure to the winch. Apply at least 230 PSI pressure to release brake and verify
that brake releases, by observing that the winch drum rotates.