Ramsey Winch CHEVY WRAPAROUND KIT 295925 - Manual (Page 6)

KI-913356-0301-C 5
FURNISHED WITH WINCH
Step 12
Insert top bar #8 into tube at top of L.H. wraparound #4 (Figure11). Align top tube of R.H.
wraparound # 3 with opposite end of top bar #8 (Figure 12). Refer to Steps 10 &11 to complete
installation of R.H. wraparound.
Step 13
Install fairlead as shown below. Note that top holes in channel (Figure 13) align with bottom holes on
roller fairlead (Figure 14). Secure using capscrew, lockwasher, and nut furnished with winch.
Figure 13
Figure 14
Figure 11 Figure 12
FURNISHED WITH WINCH
FURNISHED WITH WINCH