Ramsey Winch CHEVY WRAPAROUND KIT 295925 - Manual (Page 2)

KI-913356-0301-C 1
Step 1
Note: It is not necessary to remove or modify the vehicle bumper to install this mounting kit. Remove
and discard the M12 bolts on either side and bottom of the tow hook (Figure 1), remove tow hook
and set aside.
Step 2
Insert left hand frame mounting bracket assembly #7 through air dam. Replace tow hook and secure
using (3) 12 mm bolts #18 and lockwashers # 26 (Figure 2).
DO NOT TIGHTEN HARDWARE COMPLETELY.
Step 3
Repeat steps 1 & 2 above for right hand side. DO NOT TIGHTEN HARDWARE COMPLETELY.
Figure 1
Figure 2