Ramsey Winch RPH-20000 (RAMSEY GBX) - Manual (Page 9)

3. Remove brake assembly (item #31) by removing (2) mounting screws (item #21) attaching brake
to end bearing (item #8). CAUTION: Brake is spring loaded by clutch spring and must be
restrained against end bearing as mounting screws (item #21) are removed. Remove coupling
(item #6) and gasket (item #34) from end bearing. Take note of mounting configuration for proper
mounting of parts during re-assembly.
4. Remove winch from upright mounting frame (item #2) by removing (10) capscrews (item #17),
(10) lockwashers (item #24) and (2) capscrews (item #18) with (2) lockwashers (item #24). Pull
motor end bearing (item #8) from drum assembly (item #1).
6