Ramsey Winch Powermaster Series 20K Bumper and Winch - Manual (Page 9)

7 OM-914206-1208-B
5. Remove vertical roller pin #120 from right hand side of roller guide #102 by removing spring
pin #119. Spring pins should be removed by driving inward through the roller. Vertical roller
pin has (2) lube fittings #118 located one at either end of the roller. Once the vertical roller pin
is removed from right hand side of roller guide, vertical roller #117 can be removed. Remove
vertical roller from left hand side of roller guide in the same way.
6. The two horizontal rollers #116 are held in place by the roller guides and can now be removed.
Each horizontal roller has (2) lube fittings #118, located one at either end of the roller. To
remove the right hand roller guide #102, and the left hand roller guide #103 remove (3)
capscrews #111, (3) washers #114, and (3) nuts #112 each side.
102
119
117
120
112
102
112
118
114
111
103
111
114
116