Ramsey Winch Powermaster Series 20K Bumper and Winch - Manual (Page 14)

12 OM-914206-1208-B
6. Remove output shaft #16, output carrier assembly #1, and input carrier assembly #6 from
drum #13. Disassemble in the following order:
Knock (3) spring pins #49 inward to center of input carrier assembly #6. Remove (3) input
planet pins #52 from input carrier assembly #6. Remove (3) input planet gears #4 from input
carrier assembly #6.
Remove output shaft external retaining ring #57 from output shaft #16. Slide input carrier #6 f
rom output shaft #16.
Remove thrust washer #61 from output shaft #16. Slide output carrier assembly #1 from output
shaft #16. Output carrier assembly #1 must be purchased as an assembly. Replacement gears
are not available.
16
1
61
6
49
4
49
4
52 49
13
57
52
4
52