Ramsey Winch 50K WILDCAT WINCH - Manual (Page 12)

11 OM-914225-0209-B
16. By removing snap ring #58, the input shaft #22 and ball bearing #31 may be removed.
17. To remove the motor end bearing #18 support drum #14 with a nylon strap or chain and hoist.
Lift on the drum to tension the strap. Remove (4) bolts #67 and (4) nuts #68 attaching the end
bearing to the mounting angles #6 and #7. The motor end bearing #18 will be supported on the
output shaft end and may be slid off using a nylon strap and hoist to lift it.
67
68
18
22
31
58
14
67
56
6
7