Ramsey Winch 20K POWERMASTER - Manual (Page 9)

7 OM-914209-0508-A
3. Position roller guide face down on a level surface and (2) capscrews #27 and roller guide tie
bar #22. Horizontal rollers #37 can be removed from the left and right hand roller guides once
the tie bar has been removed. Horizontal rollers #37 have (2) lube fittings #43, one located at
either end of the roller.
4. Remove vertical roller pin #61 from right hand side of roller guide #14 by removing spring pin
#63. Spring pins should be removed by driving inward through the roller. Vertical roller pin #61
has (2) lube fittings #43, one located at either end of the roller pin. Once the vertical roller pin
is removed from right hand side of roller guide, vertical roller #38 can be removed. Remove
vertical roller from left hand side of roller guide #15 in the same way.
27
27
22
37
15
14
63
38
61
43
43
38
63
61
43
43