Ramsey Winch 20K POWERMASTER - Manual (Page 11)

9 OM-914209-0508-A
6. Slide clutch end bearing #2 from drum. Drum freespool drag puck #12, drum freespool spring
# 68, and brake disc spacer # 73 will fall out when end bearing is removed from drum. Retain
these items for re-assembly.
To remove shifter yoke #19, drive spring pin #59 inward through shifter yoke. Lift shifter
assembly out by pulling up on shifter handle assembly #5 until shifter shaft #18 is clear of
shifter yoke #19. Yoke can then be lifted out of end bearing.
To replace handle #5 on shifter shaft #18, first remove spring pin #59, then slide handle
assembly #5 from shifter shaft #18. O-ring #53 can be replaced at this time.
To replace shifter detent bracket #23, first remove (2) ¼ x 20 capscrews #26 and (2) ¼
lockwashers # 35, then remove shifter detent bracket #23 and replace.
12
68
23 35
54
26
73
34
29
74
19
58
2
18
59
53
5