Ramsey Winch 16K Capstan - Manual (Page 9)

Remove the carrier assembly (item #2), input coupling (item #10), and retaining ring (item #26).
Remove ring gear (item #12) and dowel pins (item #15).
Using a screwdriver, remove the retaining rings (item#25) from the gear housing (item #1)
Remove pin (item #14) from output shaft (item#9)
Using a soft hammer, gently tap the output shaft (item#9) from housing (item #1).
Bearings (item #23) can be removed from output shaft (item #9) by removing retaining rings (item #24)
Oil seal (item #21) should be inspected and replaced if necessary.
7
21
22
1
37
36
22
23
24
24
23
25
25
9
10
2
12
15
14
26
24
22