Ramsey Winch 16K Capstan - Manual (Page 11)

Insert springs (item #18) into pockets in back of brake piston.
Insert motor coupling (item #4) , engaging it with input shaft (item #5).
Place gasket (item #17) on mounting surface of motor (item #11). Slide motor shaft into coupling. Attach motor to
motor end bearing housing using (2) capscrews (item #38). Evenly tighten to 49 ftlbs. (66 Nm) torque.
Install the counterbalance valve (item #19) to the motor using (4) capscrews (item #38). Tighten to 17 ft-lbs (23 Nm).
Securely connect fittings (item #20) to motor end housing and counterbalance valve, and connect tube assembly
(item #40) to fittings.
Apply at least 550 PSI hydraulic system pressure to brake and verify that brake releases.
9
18
40
17
11
38
20
19
39
20
5
4