ATTO Technology 2400C/R/D - Manual (Page 11)

6
A bicolor Ready/Fault LED lights green to indicate
ready, lights yellow to show a faulted condition, and is
off to indicate not ready.
Embedded in the Ethernet port connector: a
lighted green LED shows a valid link; off indicates that
no link is present. A separate blinking yellow LED
indicates activity.
Fibre Channel port: a lighted green LED indicates
link; off means no link. A separate green LED
indicates activity if it is lit, no activity if it is off.
SCSI ports: a green LED on each port indicates
activity if is lit. LEDs on the front panel are:
A bicolor Ready/Fault LED is lighted green to
indicate ready, lighted yellow to show a faulted
condition, and off indicates not ready.
SCSI ports: a green LED on each port indicates
activity if is lit.
Fibre Channel port: bicolor LED indicates FC
speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and
yellow indicates 4-Gb FC. A separate green LED
indicates activity if it is lit, no activity if it is off.
Exhibit 1.2-1 FibreBridge 2390R/D dimensions with front panel LEDs and connector side details
S erial port
R eady, Fault LE D s
Ethernet port Fibre C hannel port
FC A ctivity, Link LE D s
S C SI ports Pow er receptacle
SC S I A ctivity LED s
R eset sw itch