Maintenance, Nameplates / warning decals maintenance, Welder / generator mainte- nance – Lincoln Electric IM10102 AIR VANTAGE 650 User Manual
Page 38: Warning

D-5
MAINTENANCE
D-5
NAMEPLATES / WARNING DECALS
MAINTENANCE
Whenever routine maintenance is performed on this
machine - or at least yearly - inspect all nameplates
and labels for legibility. Replace those which are no
longer clear. Refer to the parts list for the replacement
item number.
WELDER / GENERATOR MAINTE-
NANCE
STORAGE
Store the AIR VANTAGE
®
650 CUMMINS in clean,
dry, protected areas.
CLEANING
Blow out the generator and controls periodically with
low pressure air. Do this at least once a week in par-
ticularly dirty areas.
BRUSH REMOVAL AND REPLACEMENT
It is normal for the brushes and slip rings to wear and
darken slightly. Inspect the brushes when a generator
overhaul is necessary.
Do not attempt to polish slip rings while the
engine is running.
------------------------------------------------------------------------
AIR VANTAGE
®
650 CUMMINS
WARNING
Table D.1 Engine Maintenance Components
ITEM
MAKE
PART NUMBER
SERVICE INTERVAL
Air Cleaner Element
Donaldson
P822768
(With Service Indicator) Clean as Needed,
(Engine)
Replace as indicated by Service Indicator.
Air Cleaner Element
Donaldson
P821575 (Without Service Indicator) Clean as Needed,
(Compressor)
Replace every 200 Hours.
Oil Filter
Cummins
C6002112110
Replace every 250 hours or 3 months,
Fleetguard
LF16011
whichever is less.
Fan Belt
Cummins
C0412021749
Inspect every 1000 hours or 12 months,
whichever is less.
Fuel Strainer
Cummins
3826094
Inspect and Replace monthly as required.
Fleetguard
FF5079
Replace annually.
Fuel Filter /
Fleetguard
FS19594
Replace every 500 hours or 6 months,
Water Separator
whichever is less.
Battery
-----
BCI GROUP 34
Inspect every 500 hours
Engine Oil Change
See Manual
-----
Change every 250 hours or 3 months,
whichever is less. Check daily.