1 introduction, 2 monitoring dc power and smart battery, 1 using the application – IEI Integration PM-P006UPS User Manual

Page 34

PM-P006UPS DC/DC Converter Module

Page 26

5.1 Introduction

The IEI IDDUPS Battery Status Monitor application detects the information of the smart

battery and monitors the battery status. It is recommended to execute this IDDUPS

application in Windows XP SP2 environment.

5.2 Monitoring DC Power and Smart Battery

5.2.1 Using the Application

Follow the steps below to start the IDDUPS Battery application.

Step 1:

Use the RS-232 cable to connect the JP2 connector on the PM-P006UPS to the

serial port of the SBC. Please refer to Section

173H173H181H

4.2.5

for the location of the JP2

connector.

Step 2:

Insert the application CD that comes with PM-P006UPS.

Step 3:

Double click the IDDUPS.exe icon (

174H174H182H

Figure 5-1

Figure 5-1: IDDUPS Battery Status Monitor Application

Step 4:

Click the SETTING tab when the IDDUPS Battery application is loaded

(

183H

Figure 5-2