IEI Integration PM-P006UPS - Manual (Page 25)

PM-P006UPS DC/DC Converter Module
Page 17
Battery connector (2) 7-pin wafer connector J2
Input power connector 4-pin wafer connector CN1
Output power connector 12-pin connector CN7
RS-232 cable connector 3-pin wafer connector JP2
Table 4-1: Peripheral Interface Connectors
4.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the PM-P006UPS.
4.2.1 ATX Mode Connector
CN Label: CN2
CN Type: 4-pin wafer connector (1x4)
CN Location: See
163H163H171H
Figure 4-2
CN Pinout s: See
164H164H172H
Table 4-2
Connect the ATX Mode Connector (CN2) to the motherboard to use ATX mode to control
power on/off.