IEI Integration AFL-LX-Series v2.10 - Manual (Page 59)

AFOLUX LX Series Flat Panel PC
Page 59
Motherboard
DDR memory module
Wireless LAN module
Inverter
The internal aluminum back cover of the AFOLUX LX series must be removed. To remove
the aluminum back cover, please follow the steps below.
4.3.1 AFL-07A-LX Internal Aluminum Cover Removal
Step 1: Remove the two retention screws securing the internal aluminum cover (
4
Figure
4-1 ).
Figure 4-1: AFL-07A-LX Aluminum Back Cover Retention Screws
Step 2: Remove the four hexagonal pillars on the bottom panel (
4
Figure 4-2 ).
Figure 4-2: Four Hexagonal Pillars on the Bottom Panel (AFL-07A-LX)
Step 3: Push the external interface connector apart from the aluminum cover and lift the
aluminum cover off the AFL-07A-LX.
Step 4: Disconnect the power switch cable from the motherboard and remove the
aluminum cover. Step 0: