IEI Integration AFL-LX-Series v2.10 - Manual (Page 51)

AFOLUX LX Series Flat Panel PC
Page 51
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the flat panel PC.
Step 0:
3.8.4 Cabinet and Rack Installation
The AFL LX series flat panel PC can be installed into a cabinet or rack. The installation
procedures are similar to the panel mounting installation. To do this, please follow the
steps below:
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the AFL LX series flat panel PC and the rack/cabinet
into which the AFL LX series is installed.
Step 1: Slide the rear chassis of the AFL LX series flat panel PC through the
rack/cabinet bracket until the aluminum frame is flush against the front of the
bracket (
4
Figure 3-20 ).
Figure 3-20: The Rack/Cabinet Bracket
Step 2: Insert the rack mounting clamps into the pre-formed holes along the edges of
the flat panel PC, behind the ABS/PC plastic frame. There are a total of 4 rack