4 afl-12a-lx internal aluminum cover removal, 4 memory module replacement, Emory – IEI Integration AFL-LX-Series v2.10 User Manual
Page 63: Odule, Eplacement, Figure, Step 4, Carefully cross the wireless module c, Figure 4-5, Figure 4-5: wireless m
AFOLUX LX Series Flat Panel PC
Page 63
4.3.4 AFL-12A-LX Internal Aluminum Cover Removal
Step 1:
Remove the eight retention screws securing the internal aluminum cover
(
4
Figure 4-10: AFL-12A-LX Aluminum Back Cover Retention Screws
Step 2:
Remove the four hexagonal pillars on the bottom panel (
4
Figure 4-11: Four Hexagonal Pillars on the Bottom Panel (AFL-12A-LX)
Step 3:
Push the external interface connector apart from the aluminum cover and lift the
aluminum cover off the AFL-12A-LX.
Step 4:
Disconnect the power switch cable from the motherboard and remove the
aluminum cover.
Step 0:
4.4 Memory Module Replacement
The flat panel PC is preinstalled with a 256MB/512MB DDR memory module. If the
memory module is fail, follow the instructions below to replace the memory module.
Step 1:
Remove the back cover. See Section
4
Remove the internal aluminum back cover. See Section
4
4.3 above.