IEI Integration AFL-LX-Series v2.10 - Manual (Page 41)

AFOLUX LX Series Flat Panel PC
Page 41
Step 5: Disconnect the power switch cable from the motherboard and remove the
aluminum cover.
Step 6: Remove the four HDD bracket retention screws (
4
Figure 3-7 ) and lift the HDD
bracket off the panel PC.
Figure 3-7: AFL-12A-LX HDD Bracket Retention Screws
Step 7: Attach the HDD brackets to the HDD. To do this, align the four retention screw
holes in the both sides of the HDD bracket with the retention screw holes on the
sides of the HDD. Insert four retention screws into the HDD bracket (
4
Figure
3-8 ).
Figure 3-8: AF-12A-LX HDD Retention Screws
Step 8: Connect the IDE cable to the rear of HDD.
Step 9: Install the HDD into the AF-12A-LX by aligning the retention screw holes in the
HDD brackets with the retention screw holes on the chassis. Insert the four
retention screws.