7 bottom panel connectors, 1 lan connection, Ottom – IEI Integration AFL-W10A-N270 v3.10 User Manual

Page 47: Anel, Onnectors

AFL-W10A-N270 User Manual

Page 47

Step 2:

Once the mounting arm has been firmly attached to the surface, lift the panel PC

onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

panel PC. The arm mount retention screw holes are shown in Figure 2-18.

Figure 2-18:AFL-W10A-N270 Arm Mounting Retention Screw Holes

Step 4:

Secure the panel PC to the interface pad by inserting the retention screws

through the bottom of the mounting arm interface pad and into the panel PC.

Step 0:

2.7 Bottom Panel Connectors

All I/O interface connections of the AFL-W10A-N270 are found on the bottom panel.

2.7.1 LAN Connection

There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to

an external network. To connect a LAN cable with an RJ-45 connector, please follow the

instructions below.

Step 1:

Locate the RJ-45 connector

on the bottom panel of the AFL-W10A-N270

Series.