IEI Integration AFL-W10A-N270 v3.10 - Manual (Page 23)

AFL-W10A-N270 User Manual
Page 23
WARNING:
When installing the AFL-W10A-N270, make sure to:
 Turn the power off: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
 Only let certified engineers change the hardware settings:
Incorrect settings can cause irreparable damage to the product.
 Install the monitor with assistance: The product is very heavy and
may be damaged by drops and bumps. Two or more people should
install the panel PC.
 Take anti-static precautions: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the panel PC
Step 2: Check all the required parts are included
Step 3: Install the CompactFlash® card
Step 4: Mount the panel PC
Step 5: Connect peripheral devices to the bottom panel of the panel PC
Step 6: Connect the power cable
Step 7: Configure the system S te p 0 :
2.1 Unpack the Panel PC
To unpack the panel PC, follow the steps below: