IEI Integration AFL-W10A-N270 v3.10 - Manual (Page 124)

AFL-W10A-N270 User Manual
Page 124
Step 10: Eject the One Key Recovery CD and restart the system.
Step 11: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.
Step 12: Enable the Auto Recovery Function option (Advanced  iEi Feature  Auto
Recovery Function ).
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
iEi Feature

Auto Recovery Function
[Enabled]
Recover from PXE [Disabled]
 Select
Screen
  Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 21: IEI Feature
Step 13: Save changes and restart the system. If the system encounters a Blue Screen of
Death (BSoD) or a hang for around 10 minutes, it will automatically restore from
the factory default image. Step 0:
B.4 Setup Procedure for Linux
The initial setup procedure for Linux system is mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.
Step 1: Hardware and BIOS setup . Refer to Section B.2.1.
Step 2: Install Linux operating system . Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.