2 ppc-3710a-n270 and ppc-3712a-n270, Figure 4-32: install into a rack/cabinet – IEI Integration PPC-37xx-N270 v1.01 User Manual

Page 76

PPC-37xx-N270 Panel PC

Page 60

Figure 4-32: Install into a Rack/Cabinet

Step 5:

Once the flat panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (Figure 4-32).

Step 0:

4.13.4.2 PPC-3710A-N270 and PPC-3712A-N270

Step 1:

The back of the aluminum frame surrounding the LCD screen has retention

screw holes (PPC-3710A-N270 has 10 holes and PPC-3712A-N270 has 8 holes)

for a cabinet/rack installation bracket.

NOTE:

When purchasing the cabinet/rack installation bracket make sure it is

compatible with both the flat panel PC and the rack/cabinet into which

the panel PC is installed.