2 panel mounting, 1 ppc-3708a-n270 and ppc-3710a-n270, Figure 4-22: secure the chassis – IEI Integration PPC-37xx-N270 v1.01 User Manual

Page 69

PPC-37xx-N270 Panel PC

Page 53

Figure 4-22: Secure the Chassis

4.13.2 Panel Mounting

4.13.2.1 PPC-3708A-N270 and PPC-3710A-N270

To mount the PPC-3708A-N270 or PPC-3710A-N270 flat panel PC into a panel, please

follow the steps below.

Step 1:

Select the position in the panel to mount the panel PC.

Step 2:

Cut out a section from the panel that corresponds to the dimensions of the flat

panel PC chassis. The panel section that is cut out must be smaller than the size

of the aluminum frame that surrounds the TFT LCD panel but just large enough

for the chassis to fit through. Refer to Figure 4-23 and Figure 4-24 for the

suggested cut out size.