beautypg.com

Figure 4-21: mount the chassis – IEI Integration PPC-37xx-N270 v1.01 User Manual

Page 68

background image

PPC-37xx-N270 Panel PC

Page 52

Figure 4-21: Mount the Chassis

Step 3:

Secure the panel PC with the wall-mounting kit. To do this, stick the protective

cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top

panel of the panel PC. Carefully mark the location of the wall-mounting kit screw

holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the

wall-mounting kit to the wall by inserting a retention screw into the pilot hole on

the wall (Figure 4-22). This step is to avoid the panel PC being pushed apart

from the wall-mounting bracket accidentally.

Step 0:

See also other documents in the category IEI Integration Computers: