IEI Integration uIBX-200 v1.10 - Manual (Page 93)

UIBX-200-R11/Z510P Embedded System
Page 83
Step 7: The recovery tool menu appears. (
74
Figure A-25 )
Figure A-25: Recovery Tool Menu
Step 8: Create a factory default image . Follow Step 2 ~ Step 12 described in Section
74
A.2.5 to create a factory default image.
A.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.