IEI Integration uIBX-200 v1.10 - Manual (Page 25)

UIBX-200-R11/Z510P Embedded System
Page 15
4.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ Read the user manual: The user manual provides a complete description of
the UIBX-200-R11/Z510P, installation instructions and configuration options.
ƒ DANGER! Disconnect Power: Power to the UIBX-200-R11/Z510P must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the UIBX-200-R11/Z510P is opened while the power cord is
still connected to an electrical outlet.
ƒ Qualified Personnel: The UIBX-200-R11/Z510P must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.
ƒ Air Circulation: Make sure there is sufficient air circulation when installing the
UIBX-200-R11/Z510P. The UIBX-200-R11/Z510P’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
UIBX-200-R11/Z510P. Leave at least 5 cm of clearance around the
UIBX-200-R11/Z510P to prevent overheating.
ƒ Grounding: The UIBX-200-R11/Z510P should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the UIBX-200-R11/Z510P.