IEI Integration IMBA-G412ISA v2.00 - Manual (Page 93)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 79
5.3.3 S u p e r IO Co n fig u ra tio n
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the serial ports.
BIOS SETUP UTILITY
Advanced
Configure F81865F Super IO Chipset

Serial Port1 Address [3F8]
Serial Port1 IRQ [IRQ4]
Serial Port2 Address [2F8]
Serial Port2 IRQ [IRQ3]
Select RS232 or RS422/RS485 [RS232]
Serial Port3 Address [3E8]
Serial Port3 IRQ [IRQ10]
Serial Port4 Address [2E8]
Serial Port4 IRQ [IRQ10]
Serial Port5 Address [338]
Serial Port5 IRQ [IRQ10]
Serial Port6 Address [328]
Serial Port6 IRQ [IRQ10]
IR Function [COM6]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Allows BIOS to select
Serial Port1 Base
Addresses
 Select Screen
↑ ↓ Select Item
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
 Se ria l Port1 Addre s s [3F8]
Use the Serial Port1 Address option to select the Serial Port 1 base address.

Disabled No base address is assigned to Serial Port 1

3F8 D EFAULT Serial Port 1 I/O port address is 3F8

2F8 Serial Port 1 I/O port address is 2F8
 Se ria l Port1 IRQ [IRQ4]
Use the Serial Port1 IRQ option to select the interrupt address for serial port 1.

IRQ4 D EFAULT Serial port 1 IRQ address is IRQ4