IEI Integration IMBA-G412ISA v2.00 - Manual (Page 104)

901/20/2012164
P a g e 90
IMBA-G412IS A ATX Mo th e rb o a rd
 Se ria l port numbe r [COM1]
Use the Serial port number option to select the serial port used for remote access.
 COM1 D EFAULT System is remotely accessed through COM1
 COM2 System is remotely accessed through COM2

COM3 System is remotely accessed through COM3
 COM4 System is remotely accessed through COM4

COM5 System is remotely accessed through COM5
 COM6 System is remotely accessed through COM6
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
 Ba s e Addre s s , IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
 Se ria l Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
 115200 8,n,1 D
EFAULT
 57600 8,n,1
 38400 8,n,1
 19200 8,n,1
 09600 8,n,1