IEI Integration IMBA-G412ISA v2.00 - Manual (Page 87)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 73
 Configure SATA Cha nne ls [Be fore PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered.

Before PATA D EFAULT Puts SATA channels before PATA channels.

Behind PATA Puts SATA channels behind PATA channels.
 IDE Ma s te r and IDE Sla ve
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
 Primary IDE Master
 Primary IDE Slave
 Secondary IDE Master
 Secondary IDE Slave
 Third IDE Master
 Third IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options is selected, the IDE configuration options shown in
Section 5.3.2.1 appear.
5.3.2.1 IDE Ma s te r, IDE S la ve
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.