IEI Integration IMB-Q670 v3.01 - Manual (Page 112)

IMB-Q670 Micro-ATX Motherboard
Page 98
Î
Normal D EFAULT Enables the serial port to function in normal
mode.
Î
IR Mode, Pusle
1.6us, Full Duplex
Enables the serial port to function in IR mode,
pulse 1.6 us at full duplex.
Î
IR Mode, Pusle
1.6us, Half Duplex
Enables the serial port to function in IR mode,
pulse 1.6 us at half duplex.
Î
IR Mode, Pusle
3/16 Bit Time, Full
Duplex
Enables the serial port to function in IR mode,
pulse 3/16 bit time at full duplex.
Î
IR Mode, Pusle
3/16 Bit Time, Half
Duplex
Enables the serial port to function in IR mode,
pulse 3/16 bit time at half duplex.
5.3.9.2 Serial Port 8 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2C8h;
IRQ=10
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10
Î
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11