3 external interface panel connectors, 2 internal peripheral connectors, 1 atx power supply enable connector – IEI Integration PICOe-PV-D4251_N4551_D5251 v1.11 User Manual
Page 30: Nternal, Eripheral, Onnectors, Table 3-1: peripheral interface connectors, Table 3-2: rear panel connectors
PICOe-PV-D4251/N4551/D5251 User Manual
Page 16
Connector
Type
Label
Serial ATA (SATA) drive connectors
7-pin SATA
SATA1, SATA2, SATA3
Serial port connectors (RS-232)
10-pin header
COM1, COM2, COM4
Serial port connectors
(RS-232/422-485)
14-pin header
COM3
SMBus connector
4-pin wafer
CN1
SPI flash connector
8-pin header
SPI1
USB 2.0 connectors
8-pin header
USB0_1, USB2_3,
USB4_5
Table 3-1: Peripheral Interface Connectors
3.1.3 External Interface Panel Connectors
Table 3-2 lists the rear panel connectors on the PICOe-PV-D4251/N4551/D5251. Detailed
descriptions of these connectors can be found in Section
6
Ethernet connector
RJ-45
LAN1
Ethernet connector
RJ-45
LAN2
Keyboard/mouse PS/2
PT1
USB port
USB port
USB6
VGA port connector
15-pin female
VGA1
Table 3-2: Rear Panel Connectors
3.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the CPU card and are only accessible when
the CPU card is outside of the chassis. This section has complete descriptions of all the
internal, peripheral connectors on the PICOe-PV-D4251/N4551/D5251.
3.2.1 ATX Power Supply Enable Connector
CN Label:
ATXCTL1
CN Type:
3-pin wafer (1x3)
CN Location: