beautypg.com

Cleaning and reuse of sensors, Cleaning and reuse of patient cables – ZOLL R Series Monitor Defibrillator Rev D User Manual

Page 11

background image

Cleaning and Reuse of Sensors

9650-0901-01 Rev. D

R Series Pulse Oximetry (SpO

2

)

9

8.

Connect the SpO

2

patient cable to the SpO

2

connector on the rear panel of the R Series unit.

Cleaning and Reuse of Sensors

Reusable sensors can be cleaned as follows:

1. Disconnect the sensor from the patient cable.

2.

Wipe the entire sensor clean with a 70% isopropyl alcohol moistened pad.

3.

Allow the sensor to air dry before returning it to use.

Cleaning and Reuse of Patient Cables

Patient cables can be cleaned as follows:

1. Disconnect the sensor from the patient cable (if attached).

2.

Disconnect the cable from the rear of the R Series unit.

3.

Wipe the cable clean with a 70% isopropyl alcohol moistened pad.

Allow the cable to dry before using it.

3P/

SpO

2

Cable Connector