WARN PullzAll SERVICE GUIDE 685005, 685006 & 685007 - Manual (Page 32)

986767A2.doc Page 32 of 45
2. Take the Tail Hook and align the
mounting holes with the Spacer Bracket
holes and Chassis assembly.
3. Insert the Pin through the Hook
assembly.
4. Insert the Cotter Pin inside the hole of the
Pin and bend the ends of the Cotter Pin
with the help of pliers.
2.7.3 INSPECTION OF TAIL HOOK
• Inspect the Hook for signs of wear and damage.
• Hook damage examples: cracks, twisted components, excessive opening, seat wear,
loose or damaged safety latch or corrosion.