WansView NCH 537MW - Manual (Page 9)

http://www.wansview.com
9
Figure 5
Select „On‟ and click „Search‟, and then select wireless router in pop up menu, click „OK‟ and enter its
password, click „apply‟ to save the wireless settings. And you can click „check‟ to check if the wireless
setting is successful. After setting successfully, please pull out network cable and restart the camera to
use the wireless function .
2.3. Operation step for connecting to WAN
You should connect it to LAN network and do port forwarding at first, connect as figure 6.
Figure 6
For example: operation step of port forwarding as figure 7.